Welcome to the Strateos Developer Center!
Here you'll find comprehensive documentation to help you start working with Strateos as quickly as possible. Read below for a quick overview or use the navigation on the left or the search bar above to explore other topics.
This document will cover the basics of getting started with Strateos, including:
- How to send us your samples and populate your inventory
- Launching one of our standard validated protocols
- Custom protocol implementation
- Developing your own protocol
Strateos prohibits the use, without prior approval, of a list of material classes. Please see the documentation on Hazardous Materials.
Before you can launch any protocol, you must arrange for Strateos to have your samples on hand. Samples you wish to analyze that exist in your lab should be transferred into Strateos tubes or 96-well plates that you receive in an Intake Kit. Commercial reagents can also be reformatted into Strateos-compatible containers and sent to us. You are responsible for shipping your reagents back to Strateos with packing material sufficient to keep your samples at the desired temperature.
Shipping Commercial Reagents to Strateos
Some commercial reagents can be shipped directly to Strateos from the vendor. We will accept liquid reagents in microtubes or microplates. These reagents will be reformatted into Strateos-compatible containers upon arrival. This process will incur a $50 intake fee per 96-pcr plate or 12 1.5mL tubes. You will still need to populate your inventory (see below) so that we can expect the shipment and know how to reformat the reagents received into Strateos-compatible containers.
To request an intake kit containing plates and tubes compatible with Strateos automation, navigate to your Inventory tab, click on Intake Kits, and then click the Request Intake Kit Button. Make sure you've entered a payment method before you continue.
Once you've filled in your shipping address and requested a kit, it will show up under the "In Transit to You" section.
Once you've requested a kit, you can populate your inventory with the samples you plan to send us by navigating to the Samples tab and clicking the "Add New Samples" button. From here, you can specify the names and volumes of the samples you'll be sending to us, and what container type they're in.
When filling out the sample intake form, the storage field is required. The available storage environments are the same ones listed in the Containers section. This location will also be the destination of that container after runs unless otherwise specified in a protocol.
After you've entered your samples, they will be visible in your inventory and useable within protocols, however, runs will notify you that they are "awaiting shipment" and won't be executed until the samples are received.
Each shipment is associated with a four letter intake code, which should be written on the packaging in which you ship us your samples. In addition, each sample (individual tube or plate) has its own 3-letter code which should be written on the container itself. If these codes aren't included, we won't be able to properly insert your samples in inventory and track them.
Strateos Plates and Tubes
Only the provided tubes and plates can be used with our platform. Please contact us if you have samples that cannot conform to the containers currently provided with the intake kit.
Please do not attach anything to Strateos containers. Sticky labels can interfere with the sample in take process. If you need to label your containers, please write on the side of them with a permanent marker.
If you choose to submit your samples in your own containers or send reagents to Strateos from a vendor directly, you will be charged an intake fee of $50 per 96-well plate or $50 per 12 tube shipment.
To launch a standard protocol, navigate to one of your existing projects (or create a new one) and click on "Launch a Run" in the upper right corner. If this is your first run in a project, you can also click the "Browse All Protocols" button. On the dialog that comes up, select the protocol you wish to run.
The next screen will present you with parameters you can use to customize your protocol. Any field that requires a Container, Aliquots or Aliquot will bring up the inventory browser, from which you can choose the appropriate object from your inventory.
Once you're satisfied with your parameters, click "Next". If the protocol is valid, the next screen will show you an overview of your protocol with the parameters and samples you chose. You can click on each instruction card to see details about what the Workcell will be doing. If everything looks ok, click "Submit".
Most protocols are priced on a per-reaction basis.
Congratulations! Your run is now in the queue and will begin execution shortly. You'll get an email when the run begins and when it's completed. If your run generated analytical data, it will be viewable under the Results tab.
See the whole process in action below:
If none of the standard protocols available are sufficient for the experiment you'd like to automate, never fear! We have an experienced team of application scientists that can help you implement a custom protocol.
Send us an email at [email protected] with an outline of the protocol you'd like implemented and we will get back to you with specifics.
Updated 8 months ago